Depth Sensor Node Streambed Installation Procedure

Retourner au tutoriel

Anglais

Français

Étape précédente

Traduction de l’étape 10

Étape 10

Depth Sensor Node Streambed Installation Procedure, Attaching node to two arms: étape 0, image 1 de 3

Depth Sensor Node Streambed Installation Procedure, Attaching node to two arms: étape 0, image 2 de 3

Depth Sensor Node Streambed Installation Procedure, Attaching node to two arms: étape 0, image 3 de 3

Attaching node to two arms

Place four screws into the node enclosure with the washer and strut channel nuts on the backside.
You can remove the strut channel nut spring to make installation easier.
Slide the node into the strut channel arm.
The washer should be on the outside of the strut channel and the strut channel nut should be on the inside.
Tighten the screws with a 3/8 inch wrench.
This is what the node looks like attached to two strut channel arms.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.