Samsung Galaxy A20e Display Replacement

Étape 1

Remove the SIM and MicroSD tray.

Étape 2

Release the back cover with the help of a thin blade or a Jimmy. Insert the tool between the frame display and the cover unclipping it along the entire perimeter.

Étape 3

Disconnect the Fingerprint scanner.

Étape 4

Using a Philips #00 screwdriver, remove the 13 screws securing the inner cover.

Étape 5

Now you can remove the upper and lower covers that protect the logic board and the speaker respectively.

Étape 6

Pry up the following four connectors:

Étape 7 — Remove The Battery

Remove the battery by placing a few drops of alcohol underneath the battery and letting it sit for about a minute. This will weaken the double-sided adhesive that holds the battery.

Étape 8

Disconnect the two blue and white antenna wires.

Étape 9

Remove the glued-on vibration motor with the help of a small amount of heat

Étape 10

Once you have completed the component removal, you can begin the reassembly by placing the components on the new display.