Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 1

Étape 1
Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver. Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.
  • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

  • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

Rimuovi le quattro viti da 6,5 mm dagli angoli usando un cacciavite a tre punte Y00.

Rimuovi le due viti da 4,6 mm disposte centralmente in alto e centralmente in basso sul tuo dispositivo usando un cacciavite a tre punte Y00.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.