Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver. Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.
  • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

  • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

トライウィングドライバーを使って、バックカバーをデバイスに固定しているネジを外します。外す必要のある6本のネジは次のようになります。

デバイスの角に留められている#00 6.45mmトライウィングネジ4本

デバイスの上部中央と底部中央に留められている#00 4.6mmトライウィングネジ2本

[* orange] Using the tri-wing screwdriver, unscrew theyellow] Remove four 6.5 mm screws holding the back cover to the device. The six screws that need to be removed include:
[* orange] Four #00 6.45mm tri-wing screws that are located at
from the corners of the device.
[* yellow] Two #00
back cover using a tri-point Y00 screwdriver.
[* green] Remove two
4.6mm tri-wing screws that are located atfrom the top-center and bottom-center of the devicedevice using a tri-point Y00 screwdriver.
[* orange] Using the tri-wing screwdriver, unscrew theyellow] Remove four 6.5 mm screws holding the back cover to the device. The six screws that need to be removed include:
[* orange] Four #00 6.45mm tri-wing screws that are located at
from the corners of the device.
[* yellow] Two #00
back cover using a tri-point Y00 screwdriver.
[* green] Remove two
4.6mm tri-wing screws that are located atfrom the top-center and bottom-center of the devicedevice using a tri-point Y00 screwdriver.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.