Aller au contenu principal

Procedura di apertura

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 7

Étape 7
Opening Procedure, Lift the display slightly: étape 0, image 1 de 3 Opening Procedure, Lift the display slightly: étape 0, image 2 de 3 Opening Procedure, Lift the display slightly: étape 0, image 3 de 3
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Tira la ventosa applicando una tensione forte e costante fino a creare una piccola fessura tra il pannello frontale e il case posteriore.

Inserisci un plettro di apertura nella fessura.

L'adesivo impermeabile che tiene in posizione il display è molto tenace. La creazione di questa fessura iniziale richiede l'applicazione di una forza piuttosto elevata. Se hai difficoltà nell'aprire una fessura, applica altro calore e muovi lo schermo su e giù per indebolire l'adesivo finché non riesci a infilare lo strumento di apertura.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.