With the unit fully reassembled, test the speed of the motor by comparing the output of the turntable to a digital recording of the same song.

With the unit OFF and unplugged, adjust the speed by inserting the 1.5 mm Flathead screwdriver into the shown holes and carefully turning the screw in the motor housing. This step is very sensitive and will likely take multiple attempts to get the speed just right.

NOTE: do not adjust the speed of the unit while the motor is turning, as this is likely to damage the motor or cause injury.

Reinsert the lid and enjoy your repaired Audio Technica AT-LP60BK turntable.