Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 9 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 2

Étape 2
Wedge the pointed end of a spudger beneath the right speaker cable connector. Gently pry the right speaker cable connector up off from its socket on the logic board.
  • Wedge the pointed end of a spudger beneath the right speaker cable connector.

  • Gently pry the right speaker cable connector up off from its socket on the logic board.

  • Be sure you are prying up on the connector, not the socket itself.

スパッジャーの平面側先端をスピーカーケーブルコネクターの右側下に差し込みます。

右側スピーカーケーブルのコネクターをロジックボードのソケットから丁寧に引き上げます。

コネクターのみを引き上げるように注意してください。ソケット自体には接触しないでください。

[* black] Wedge the flatpointed end of a spudger beneath the right speaker cable connector.
[* black] Wedge the flatpointed end of a spudger beneath the right speaker cable connector.
[* black] Gently pry the right speaker cable connector up off from its socket on the logic board.
[* icon_caution] Be sure you are prying up on the connector, '''not''' the socket itself.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.