Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 9 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 3

Étape 3
Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case: Two black 6.8 mm screws
  • Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case:

  • Two black 6.8 mm screws

  • One silver 6.3 mm screw

  • The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Rimuovi le seguenti viti che fissano l'altoparlante destro al case superiore:

Una vite Torx T5 da 6,8 mm

Due viti Torx T5 da 6,3 mm

La vite nell'angolo potrebbe essere coperta da un pezzo di espanso. Se è questo il caso, usa le pinzette per staccarlo e rimuoverlo.

[* black] RemoveUse a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
[* red] OneTwo black 6.8 mm T5 Torx screwscrews
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.
[* black] RemoveUse a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
[* red] OneTwo black 6.8 mm T5 Torx screwscrews
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.