Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Français

Traduction de l’étape 4

Étape 4
The SIM card reader is soldered by high-temp solder paste. To protect components around from high-temp damage, we need to cut off the metal part of the reader with Cutting Nipper.
Remove the SIM card reader
  • The SIM card reader is soldered by high-temp solder paste. To protect components around from high-temp damage, we need to cut off the metal part of the reader with Cutting Nipper.

  • Then continue to stick high-temp tape on components around the reader. Apply some Paste Flux around the SIM card reader and remove the SIM card reader completely.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.