Aller au contenu principal
Anglais
Français

Traduction de l’étape 8

Étape 8
Using a metal spudger, push back on the four clips holding the LCD screen to the logic board. Next gradually pull the screen away from the board so that none of the clips are engaged. Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen.
  • Using a metal spudger, push back on the four clips holding the LCD screen to the logic board.

  • Next gradually pull the screen away from the board so that none of the clips are engaged.

  • Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.