Aller au contenu principal

2011 Jeep Grand Cherokee Tail Light Replacement

Anglais
Coréen

Traduction de l’étape 4

Étape 4
2011 Jeep Grand Cherokee Tail Light Replacement: étape 0, image 1 de 3 2011 Jeep Grand Cherokee Tail Light Replacement: étape 0, image 2 de 3 2011 Jeep Grand Cherokee Tail Light Replacement: étape 0, image 3 de 3
  • The lamp is now off the vehicle but the wiring is still connected.

  • Pull the lamp away from the vehicle far enough to access and disconnect the two body wire harness connectors

  • The smaller bottom connector (here right) is the back-up lamp and the larger one is the bulb for tail/stop/rear side marker/turn signal function. Grasp the bulb socket on the back of the rear lamp unit rotate it counterclockwise about 30 degrees to unlock it. Pull the socket and bulb straight out from the keyed opening in the housing.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.