Aller au contenu principal

Motorola Razrの分解

Anglais
Japonais

Traduction de l’étape 6

Étape 6
Motorola Razr Teardown: étape 0, image 1 de 3 Motorola Razr Teardown: étape 0, image 2 de 3 Motorola Razr Teardown: étape 0, image 3 de 3
  • So far disassembly has been relatively straightforward. As we hone in on the flexible display, we hope we don't screw it up—but for now, we're breezily unscrewing some Torx screws with our handy Mako kit!

  • With a bit of alcoholic coercion, the first battery of two comes free (weighing in at 4.7 Wh and just 2.6 mm thin)—but more on those later, we're on the fast track to silicon town now!

  • One brief pit stop on our race to motherboard glory: in removing the vibration motor (a pretty boring coin-style one) we spot some curious slime!

  • This goop could potentially be some equivalent of dielectric grease (more commonly seen in cars)—an inexpensive way to add a bit of water resistance to the board.

これまでの所、解体作業は比較的順調に進んでいます。次に開閉可能なディスプレイの内側に突入します。失敗しないと良いのですが、これまでの所、便利なMakoキットを使って数本のトルクスネジしか外していません。

イソプロピルアルコールの助けを若干借りて、2つあるうちの1つのバッテリーが外れます。(バッテリー容量は4.7Whで、わずか2.6mmの薄さです) しかし、詳細は後ほど説明しましょう。いまはシリコンタウンに繋がる近道を通っているからです。

このレース途中でピットストップするもう一つのパーツは、栄光のマザーボードです。振動モーター(いたって普通のコイン型)を取り外すと、珍しいヌルッとしたものがあります!

この粘着性は、誘電体グリース(通常は車両に使用されている)と同等のものだと思われます。そして基板に防水性能を加えるなら、安価でできる代替方法です。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.