Aller au contenu principal

iPod Touch 7e generatie Vervanging van de logic board module

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 1

Étape 1
iPod Touch 7th Generation Logic Board Assembly Replacement: étape 0, image 1 de 1
  • Flip the logic board assembly back over to expose the connectors on the back.

  • Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

  • This cable is very delicate; be careful not to stress the point where it connects to the antenna.

Draai de logic board module om om de aansluitingen op de achterkant bloot te leggen.

Gebruik de zijkant van een plastic openingstool om de antenne-aansluiting op voorzichtige wijze van de achterkant van het logic board omhoog te duwen.

Deze kabel is erg kwetsbaar; wees voorzichtig dat je het punt waar het met de antenne verbonden is niet te veel test.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.