Aller au contenu principal
Anglais
Français

Traduction de l’étape 5

Étape 5
Peel off the clear tape from the speaker connections with tweezers. Use your soldering iron to de-solder the two wires from the speaker. Try to minimise the contact time with your iron on the bard to avoid warping and thermal shocking the board. (I used 390 C ~ 740 F)
Desoldering the speakers
  • Peel off the clear tape from the speaker connections with tweezers.

  • Use your soldering iron to de-solder the two wires from the speaker.

  • Try to minimise the contact time with your iron on the bard to avoid warping and thermal shocking the board. (I used 390 C ~ 740 F)

  • Finally remove the 4 x T5 screws that secure the logic board to the back cover.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.