Réparez vos affaires Communauté Boutique

Pebble Teardown

Retourner au tutoriel
Anglais
Français
Étape précédente Étape suivante

Traduction de l’étape 12

Étape 12
Pebble Teardown: étape 0, image 1 de 2 Pebble Teardown: étape 0, image 2 de 2

  • The back of the motherboard hosts a Panasonic pan1316 RF module, promising the Pebble's advertised Bluetooth and Bluetooth Low Energy (BLE) functionality, powered by a Texas Instruments CC2564 Bluetooth Controller.

  • After some dainty desoldering, the module's EMI shield is removed to surprisingly reveal a slightly different Texas Instruments CC2560A, that appears to not include BLE support.

  • The Bluetooth antenna printed into the flex circuit board connects to the pan1316 BT module here.

  • Word on the street was that Pebble had BLE functionality just waiting to be activated with a firmware update, but we can't find evidence of the hardware to back up this hidden potential.

  • Update: Pebble assures us that the update will be forthcoming, and explained that TI uses the same silicon for both the CC2560 and CC2564 parts—so despite the label on the chip, the update will make this a CC2564 with BLE support.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.