Aller au contenu principal

Sostituzione case inferiore MacBook Pro 13" 2019 con due porte Thunderbolt

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 5

Étape 5
MacBook Pro 13" Two Thunderbolt Ports 2019 Lower Case Replacement: étape 0, image 1 de 3 MacBook Pro 13" Two Thunderbolt Ports 2019 Lower Case Replacement: étape 0, image 2 de 3 MacBook Pro 13" Two Thunderbolt Ports 2019 Lower Case Replacement: étape 0, image 3 de 3
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

Inserisci di nuovo il tuo plettro di apertura sotto il bordo anteriore della cover, vicino a uno dei fori delle due viti più centrali.

Torci con una certa decisione il plettro per sganciare la terza clip che fissa la cover inferiore alla scocca.

Ripeti questa operazione vicino all'altro foro delle viti centrali, sganciando così la quarta clip.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.