Réparez vos affaires Communauté Boutique

MacBook Pro 13" Two Thunderbolt Ports 2019 안테나 바 어셈블리 교체

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Retourner au tutoriel
Anglais
Coréen
Étape précédente Étape suivante

Traduction de l’étape 8

Étape 8
MacBook Pro 13" Two Thunderbolt Ports 2019 Antenna Bar Assembly Replacement: étape 0, image 1 de 2 MacBook Pro 13" Two Thunderbolt Ports 2019 Antenna Bar Assembly Replacement: étape 0, image 2 de 2

  • Carefully disconnect the two antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

안테나 동축 케이블 세 개를 로직 보드에서 똑바로 들어 올려 조심히 분리하세요.

핀셋이나 spudge/스퍼저를 각 케이블 아랫면에 넣어 소켓 근처까지 밀고, 살살 비틀거나 들어 올려 분리하세요.

각 케이블을 다시 연결하려면, 커넥터를 소켓 바로 위에 맞춘 다음 제자리에 들어가도록 아래로 누르세요.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.