Aller au contenu principal

Remplacement de l'ensemble barre d'antenne du MacBook Pro 13" deux ports Thunderbolt 2019

Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.

Anglais
Français

Traduction de l’étape 12

Étape 12
MacBook Pro 13" Two Thunderbolt Ports 2019 Antenna Bar Assembly Replacement: étape 0, image 1 de 1
  • Remove the antenna cable assembly.

  • During reassembly, gently pinch the cable bundle together and guide it under the frame into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Ôtez l'ensemble antenne.

Lors du remontage, pincez délicatement le faisceau de câbles et faites-le passer sous le caloduc afin de le positionner correctement. Si nécessaire, aidez-vous de vos outils, mais ne forcez pas.

[* black] Remove the antenna cable assembly.
-[* icon_reminder] During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
+[* icon_reminder] During reassembly, gently pinch the cable bundle together and guide it under the frame into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.