Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 7

Étape 7
Use your Torx driver to remove the two outer 6.5 mm screws securing each of the two display brackets to the upper case (4 screws total). Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.
  • Use your Torx driver to remove the two outer 6.5 mm screws securing each of the two display brackets to the upper case (4 screws total).

  • Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.

Retire los dos tornillos Torx externos de 6,5 mm que sujetan cada uno de los dos soportes de pantalla a la caja superior (4 tornillos en total).

[* red] RemoveUse your Torx driver to remove the two outer 6.5 mm Torx screws securing each of the two display brackets to the upper case (4 screws total).
[* icon_note] Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.
[* red] RemoveUse your Torx driver to remove the two outer 6.5 mm Torx screws securing each of the two display brackets to the upper case (4 screws total).
[* icon_note] Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.