Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
There are two 3.25mm screws that hold the tripod mount in the camera.
-
The first screw is located on the back of the camera above the tripod mount.
-
The second screw is located on the lens side of the camera above the tripod mount.
-
Remove the second screw using the Phillips 00 Screwdriver.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.