Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 6 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Using the spudger, gently push up the board from the pins underneath it.
-
Follow the board up and around the camera, gently unseating the board and cables.
-
The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.