Aller au contenu principal

Xbox One X ファンの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Japonais

Traduction de l’étape 3

Étape 3
Xbox One X Fan Replacement, Unstick the foam tape near the power supply: étape 0, image 1 de 3 Xbox One X Fan Replacement, Unstick the foam tape near the power supply: étape 0, image 2 de 3 Xbox One X Fan Replacement, Unstick the foam tape near the power supply: étape 0, image 3 de 3
Unstick the foam tape near the power supply
  • Insert the flat end of the spudger underneath the dark grey foam tape starting at the corner closest to the power supply and edge of the console.

  • Lift up the corner.

  • Slowly push the spudger through to the other side of the tape until you can see the flat end emerge.

  • Remove the spudger slowly. There are two grey cables underneath the foam tape. Try to avoid hitting them with the spudger so that you don't damage them.

スパッジャーの平面側先端を、電源に近い角とコンソールの端付近のダークグレーのフォームテープの下に挿入します。

コーナーを持ち上げます。

テープの反対側までスパッジャーの先端がフォームから出てくるまで、をゆっくりと押し込みながらスライドします。

スパッジャーをゆっくりと外します。フォームテープの下には、グレーのケーブルが2本装着されています。スパッジャーでこのケーブルを切断しないように、ご注意ください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.