Aller au contenu principal
Anglais
Français

Traduction de l’étape 5

Étape 5
Now for the top cover. Unscrew the two screws holding it to the board (shown in picture one, already unscrewed) The board is held onto the board by an extra 3 clips. Unclip the bottom two (position shown in picture 2) and then pull the board out by holding onto the top part and the board and pulling one from the other (shown in picture 3) The board is held onto the board by an extra 3 clips. Unclip the bottom two (position shown in picture 2) and then pull the board out by holding onto the top part and the board and pulling one from the other (shown in picture 3)
  • Now for the top cover. Unscrew the two screws holding it to the board (shown in picture one, already unscrewed)

  • The board is held onto the board by an extra 3 clips. Unclip the bottom two (position shown in picture 2) and then pull the board out by holding onto the top part and the board and pulling one from the other (shown in picture 3)

Maintenant pour la couverture supérieure. Dévisser les deux vis qui le maintiennent sur le tableau (voir image 1, déjà dévissé)

Le tableau est maintenu sur le plateau par 3 clips supplémentaires. Déclipser les deux derniers (position illustrée sur l'image 2), puis tirer la carte en la tenant par la partie supérieure et la planche et en les tirant l'une par rapport à l'autre (image 3)

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.