Réparez vos affaires Communauté Boutique

Switch Pro 컨트롤러 케이스 교체

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Coréen
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Switch Pro Controller Case Replacement: étape 0, image 1 de 3 Switch Pro Controller Case Replacement: étape 0, image 2 de 3 Switch Pro Controller Case Replacement: étape 0, image 3 de 3

  • There's an adhesive pad located in the center of each handle. It will require a bit of force to pry away the front cover, but be mindful of the attached ribbon cable.

  • Delicately take off the plastic cover from the controller.

  • Don't completely remove the front cover just yet, as it's still attached to the motherboard via a white ribbon cable.

컨트롤러의 플라스틱 커버를 조심히 떼어내세요.

전면 커버는 흰색 리본 케이블을 통해 마더보드에 여전히 부착되어 있으므로 아직 완전히 분리하지 마세요.

+[* icon_note] There's an adhesive pad located in the center of each handle. It will require a bit of force to pry away the front cover, but be mindful of the attached ribbon cable.
[* black] Delicately take off the plastic cover from the controller.
-[* icon_caution] Do not completely remove the front cover just yet, as it is still attached to the motherboard via a white ribbon cable.
+ [* icon_caution] Don't completely remove the front cover just yet, as it's still attached to the motherboard via a white ribbon cable.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.