Réparez vos affaires Communauté Boutique

Cómo aplicar tiras adhesivas de liberación elástica

Retourner au tutoriel
Anglais
Espagnol
Étape précédente Étape suivante

Traduction de l’étape 4

Étape 4
How To Apply Stretch Release Battery Adhesive, Align the adhesive strips: étape 0, image 1 de 1
Align the adhesive strips

  • The stretch release adhesive strips will be applied to the rear of the replacement battery, and may need to be cut to length.

  • If you don't need to cut the adhesive strips to length, skip the next two steps.

  • Lay the stretch release adhesive strips next to your replacement battery, aligning the pull tabs slightly above the top edge of the battery.

Alinea las tiras adhesivas

Las tiras adhesivas de liberación elástica se aplicarán en la parte posterior de la batería de reemplazo, y puede ser necesario cortarlas a la medida.

Si no necesitas cortar las tiras adhesivas a la medida, salta los dos siguientes pasos.

Coloca las tiras adhesivas junto a la batería de repuesto, alineando las lengüetas de tiro ligeramente por encima del borde superior de la batería.

[title] Align the adhesive strips
[* icon_note] The stretch release adhesive strips will be applied to the rear of the replacement battery, and may need to be cut to length.
- [* black] If you do not need to cut the adhesive strips to length, skip the next two steps.
+ [* black] If you don't need to cut the adhesive strips to length, skip the next two steps.
[* black] Lay the stretch release adhesive strips next to your replacement battery, aligning the pull tabs slightly above the top edge of the battery.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.