Réparez vos affaires Communauté Boutique

Cómo aplicar tiras adhesivas de liberación elástica

Retourner au tutoriel
Anglais
Espagnol
Étape précédente Étape suivante

Traduction de l’étape 6

Étape 6
How To Apply Stretch Release Battery Adhesive, Cut the adhesive to length: étape 0, image 1 de 3 How To Apply Stretch Release Battery Adhesive, Cut the adhesive to length: étape 0, image 2 de 3 How To Apply Stretch Release Battery Adhesive, Cut the adhesive to length: étape 0, image 3 de 3
Cut the adhesive to length

  • Use a pair of sharp scissors or a razor blade to cut the stretch release adhesive tabs at the marked line.

  • If your scissors are dull, they may gum up the adhesive—you might have to start over with fresh strips.

  • Remove the excess section of adhesive.

Cortar el adhesivo a la longitud deseada

Usa unas tijeras afiladas o una cuchilla de afeitar para cortar las lengüetas de adhesivo estirable en la línea marcada.

Si las tijeras no están bien afiladas, pueden pegar el adhesivo, por lo que tendrás que empezar de nuevo con tiras nuevas.

Retira el exceso de adhesivo.

[title] Cut the adhesive to length
[* black] Use a pair of sharp scissors or a razor blade to cut the stretch release adhesive tabs at the marked line.
- [* icon_caution] If your scissors are dull, they may gum up the adhesive—you'll have to start over with fresh strips.
+ [* icon_caution] If your scissors are dull, they may gum up the adhesive—you might have to start over with fresh strips.
[* black] Remove the excess section of adhesive.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.