Aller au contenu principal

iMac Intel 27インチ Retina 5K Display 2019 ディスプレイアセンブリの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 22

Étape 22
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 1 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 2 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 3 de 3
Remove the remaining adhesive
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

コンデンサのリード線または電源の背面の露出したはんだ接合部に触れないように十分注意してください(赤色の枠内)。

ディスプレイ下部端の接着ストリップの先端にある小さなタブをつまんで、iMac上部に向けて引き抜きます。

この手順を他の接着ストリップにも繰り返して、取り出します。

作業途中で、接着ストリップが切断してしまった場合、プラスチックカードを使って残りの接着ストリップを切開します。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.