Aller au contenu principal

iMac Intel 27" Retina 5K-scherm 2019 Vervanging van de schermmodule

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 22

Étape 22
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 1 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 2 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 3 de 3
Remove the remaining adhesive
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Wees voorzichtig en zorg dat je de condensatorkabels en openliggende soldeerverbindingen aan de achterkant van de stroomvoorziening (in rood op de foto gemarkeerd) niet aanraakt.

Pak het kleine lipje aan het einde van een van de onderste kleefstrips vast en trek de kleefstrips richting de bovenkant van de iMac om deze te verwijderen.

Herhaal deze stap met de andere kleefstrip en verwijder deze ook.

Als een van de kleefstrips breekt voordat deze verwijderd zijn, kun je een plastic kaart gebruiken om door de resterende lijm heen te snijden.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.