Aller au contenu principal

Smontaggio iPhone 12 e iPhone 12 Pro

Anglais
Italien

Traduction de l’étape 8

Étape 8
iPhone 12 and 12 Pro Teardown: étape 0, image 1 de 3 iPhone 12 and 12 Pro Teardown: étape 0, image 2 de 3 iPhone 12 and 12 Pro Teardown: étape 0, image 3 de 3
  • We see a lot of standoff screws near the bottom of the case. Luckily, our Marlin Precision Screwdriver Set for iPhones has a standoff driver for just such occasions.

  • Dare we say, there's just a bit of unused space in here. Maybe just enough to fit, say, a plug of the 3.5 mm variety? (Probably not quite that much, but one can dream.)

  • It's the exact same Taptic Engine in both the 12 and 12 Pro—functionally interchangeable in our tests—and it's just a smidge smaller than what we saw in the vanilla iPhone 11, but also a smidgen thicker.

  • If it's specifics you want, specifics we got: the 12-series Taptic Engine measures 22.25 mm x 9.48 mm x 3.56 mm, while last year's variant (from the minty green iPhone 11, at left) comes in at 26.9 mm x 11.18 mm x 3.44 mm.

Vediamo molti distanziali a vite vicino alla parte inferiore del case. Per fortuna, il nostro Set di cacciaviti di precisione Marlin per iPhone include un cacciavite per distanziali specifico per queste occasioni.

Oseremmo dire che c'è un po' di spazio inutilizzato qui dentro. Quanto basta per metterci, magari, una presa, forse di quelle da 3,5 mm? (Probabilmente non c'è abbastanza spazio, ma si può sempre sognare).

Il Taptic Engine del 12 e del 12 Pro è esattamente lo stesso, intercambiabile dei nostri test anche quanto a funzionalità, è solo un pelo più piccolo di quello che abbiamo visto nell'iPhone 11 standard, ma è anche un pizzico più spesso.

Se sono specifiche che volete, specifiche avrete: il Taptic Engine della serie 12 misura 22,25 x 9,48 x 3,56 mm, mentre quello del modello dell'anno scorso (l'iPhone 11 verde, a sinistra) è da 26,9 x 11,18 x 3,44 mm.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.