Réparez vos affaires Communauté Boutique

iPhone 12 mini 여는 절차

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Coréen
Étape précédente Étape suivante

Traduction de l’étape 4

Étape 4
iPhone 12 mini Opening Procedure: étape 0, image 1 de 3 iPhone 12 mini Opening Procedure: étape 0, image 2 de 3 iPhone 12 mini Opening Procedure: étape 0, image 3 de 3

  • Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.

  • Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.

  • Make sure the opening pick is placed properly between the plastic bezel and the frame to avoid damaging your screen.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

양장본 책과 같은 튼튼한 물체 위에 iPhone을 받쳐서 핸즈프리 상태로 바닥과 평행하게 놓으면 다음 단계에서 작업하기가 더 쉬워집니다.

해어 드라이어를 사용하여 iPhone 하단 가장자리를 따라 가열하세요. 스크린이 만지기에는 약간 뜨거운 느낌이 들어야 합니다.

헤어 드라이어 사용법 지침은 이 안내서를 참조하세요.

접착제가 부드러워져서 틈이 생길 때까지 1분 정도 기다리세요.

안티클램프가 충분히 큰 틈을 만들면 스크린의 플라스틱 베젤 아랫면에 여는 픽을 끼우세요.

안티글램프가 충분한 간격을 만들지 못하면 해당 부위에 더 많은 열을 가하고 핸들을 1/4 바퀴 돌리세요.

한 번에 1/4 바퀴 이상 돌리지 말고 매회 돌리기 전에 약 1분 정도 기다린 후 돌리세요. 안티클램프와 시간이 알아서 일을 하도록 하세요.

다음 세 단계는 건너뛰세요.

[* black] Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.
-[* black] Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.
- [* icon_note] For complete instructions on how to use a hair dryer, [guide|157348|check out this guide|new_window=true].
+[* black] Use a [guide|157348|hair dryer|new_window=true] to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.
[* black] Wait one minute to give the adhesive a chance to release and present an opening gap.
[* black] Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.
- [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
+ [* icon_caution] Make sure the opening pick is placed properly between the plastic bezel and the frame to avoid damaging your screen.
+[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
[* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
[* black] ***Skip the next three steps.***

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.