Réparez vos affaires Communauté Boutique

iPhone 12 mini 打开步骤

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente Étape suivante

Traduction de l’étape 4

Étape 4
iPhone 12 mini Opening Procedure: étape 0, image 1 de 3 iPhone 12 mini Opening Procedure: étape 0, image 2 de 3 iPhone 12 mini Opening Procedure: étape 0, image 3 de 3

  • Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.

  • Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.

  • Make sure the opening pick is placed properly between the plastic bezel and the frame to avoid damaging your screen.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

将 iPhone 支撑在坚固的物体上，例如精装书，这样它就可以免提并与地面平行； 这使得接下来的步骤更容易。

使用吹风机沿着 iPhone 的底部边缘加热。 屏幕应该感觉有点太热而无法触摸。

有关如何使用吹风机的完整说明，请查看本指南。

等待一分钟，让粘合剂有机会松脱并呈现出一个开放的间隙。

当反向钳使屏幕产生足够大的间隙时，在屏幕的塑料边框下插入一个三角撬片。

如果反向钳没有形成足够的间隙，请对该区域施加更多的热量，并将手柄旋转四分之一圈。

反向钳一次不要超过四分之一圈，两次之间要等待一分钟。让反向钳和时间来为你工作。

跳过接下来的三个步骤。

[* black] Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.
-[* black] Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.
- [* icon_note] For complete instructions on how to use a hair dryer, [guide|157348|check out this guide|new_window=true].
+[* black] Use a [guide|157348|hair dryer|new_window=true] to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.
[* black] Wait one minute to give the adhesive a chance to release and present an opening gap.
[* black] Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.
- [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
+ [* icon_caution] Make sure the opening pick is placed properly between the plastic bezel and the frame to avoid damaging your screen.
+[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
[* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
[* black] ***Skip the next three steps.***

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.