Nintendo Switch デジタイザの交換

Anglais

Japonais

Conditions préalables au tutoriel

Tous les tutoriels prérequis doivent être traduits avant que cette traduction soit considérée comme complète.

Nintendo Switch リアパネルの交換

Nintendo Switch Micro SDカードリーダーの交換

Nintendo Switch シールドプレートの交換

Nintendo Switch バッテリー接続の外し方

Nintendo Switch ヒートシンクの交換

Nintendo Switch ヘッドホンジャックとゲームカードリーダーの交換

Nintendo Switch スクリーンの交換

Nintendo Switch LCDとDigitizerの外し方

Informations sur le tutoriel

= Terminé = Incomplet

Quelle pièce devez-vous remplacer ?

Titre

Introduction

Follow this guide to replace a damaged or faulty digitizer on the Nintendo Switch game console.

The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.

***Note:*** If the screen stopped working, you may just need to [guide|117395|replace the LCD panel], rather than the digitizer.

***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste for the CPU.

You can complete this repair without removing the heat sink and the game card reader, but it makes disconnecting and reconnecting the LCD panel ribbon cable much more difficult. Keep this in mind when you perform this repair.

***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

Conclusion

Quelle pièce devez-vous remplacer ?

Titre

Introduction

Conclusion

Étapes du tutoriel

Étape 1

デジタイザパネルが残ります。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.