Aller au contenu principal

Nintendo Switch 디지타이저 교체

Anglais
Coréen

Informations sur le tutoriel

= Terminé = Incomplet
    Follow this guide to replace a damaged or faulty digitizer on the Nintendo Switch game console.
    '''Note:''' If the screen stopped working, you may just need to [guide|117395|replace the LCD panel], rather than the digitizer.
    The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.
    '''***Note:'''*** If the screen stopped working, you may just need to [guide|117395|replace the LCD panel], rather than the digitizer.

    ***Note:***
     When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste for the CPU.
    You can complete this repair without removing the heat sink and the game card reader, but it makes disconnecting and reconnecting the LCD panel ribbon cable much more difficult. Keep this in mind when you perform this repair.
    '''***Note:'''*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

      Étapes du tutoriel

      Étape 1

      디지타이저 패널만 남습니다.

      Vos contributions sont faites dans le cadre de la licence open source Creative Commons.