Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 6

Étape 6
Slide the opening pick around the lower left corner and up the left edge of the iPhone, slicing through the adhesive holding the display in place. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.
Separate the screen adhesive
  • Slide the opening pick around the lower left corner and up the left edge of the iPhone, slicing through the adhesive holding the display in place.

  • Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.

Fai scorrere il plettro attorno all'angolo in basso a sinistra e quindi in alto lungo il bordo sinistro dell'iPhone, tagliando l'adesivo che tiene fermo lo schermo.

Non infilare troppo a fondo il plettro, o potresti danneggiare i cavi dello schermo lungo questo bordo dell'iPhone. Infilalo solo per pochi millimetri, o per circa lo spessore della cornice dello schermo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.