Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Espagnol

Traduction de l’étape 4

Étape 4
Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel. Take care not to damage the light sensor ribbon cables while prying. Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.
Separate the ambient light sensor
  • Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel.

  • Take care not to damage the light sensor ribbon cables while prying.

  • Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.

Usa la punta de un spudger para levantar y separar el sensor de luz ambiental de su muesca en el panel frontal.

Ten cuidado de no dañar los cables planos del sensor de luz mientras hace palanca.

Continúa deslizando el spudger por debajo del sensor de luz ambiental y su cable para separar el adhesivo que asegura el cable.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.