Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Italien

Traduction de l’étape 4

Étape 4
Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel. Take care not to damage the light sensor ribbon cables while prying. Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.
Separate the ambient light sensor
  • Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel.

  • Take care not to damage the light sensor ribbon cables while prying.

  • Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.

Usa la punta di uno spudger per sollevare e separare il sensore della luce ambientale dalla sua rientranza nello schermo.

Stai attento a non danneggiare il cavo a nastro del sensore mentre lo sollevi.

Continua a far scorrere lo spudger sotto il sensore e il suo cavo per tagliare l'adesivo che lo tiene fermo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.