Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Chinois

Traduction de l’étape 4

Étape 4
Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel. Take care not to damage the light sensor ribbon cables while prying. Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.
Separate the ambient light sensor
  • Use the point of a spudger to lift and separate the ambient light sensor from its notch in the front panel.

  • Take care not to damage the light sensor ribbon cables while prying.

  • Continue sliding the spudger underneath the ambient light sensor and its cable to separate the adhesive securing the cable.

用撬棒的尖端提起环境光传感器并将其从前面板的槽口中分离出来。

撬动时请注意不要损坏光传感器带状电缆。

继续将撬棒滑动至环境光传感器及其电缆下方,以分离固定电缆的粘合剂。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.