Aller au contenu principal

Sostituzione gruppo dello schermo iPhone 12 Pro Max

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 4

Étape 4
iPhone 12 Pro Max Display Assembly Replacement: étape 0, image 1 de 3 iPhone 12 Pro Max Display Assembly Replacement: étape 0, image 2 de 3 iPhone 12 Pro Max Display Assembly Replacement: étape 0, image 3 de 3
  • Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.

  • Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.

  • For complete instructions on how to use a hair dryer, check out this guide.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

Appoggia il tuo iPhone su qualcosa di solido come la copertina di un libro, in modo che si tenga da solo senza mani. Tenendo il telefono in questo modo si renderanno i prossimi passaggi più semplici.

Usa un asciugacapelli per riscaldare la parte inferiore dell’iPhone. Lo schermo dovrebbe essere caldo al tatto.

Per una giuda completa su come usare l’asciugacapelli, visita questa giuda.

Aspetta un minuto per dare tempo all’adesivo di perdere la presa sul corpo del telefono e permettere un’apertura.

Quando l'Anti-Clamp crea un'apertura abbastanza grande, inserisci il tuo plettro nell’apertura.

Se l'Anti-Clamp non crea un'apertura abbastanza grande, torna ad applicare calore con l’asciugacapelli e ruota di un quarto di giro la manopola dell'Anti-Clamp.

Non ruotare più di un quarto di giro alla volta e aspetta almeno 1 minuto tra rotazioni. Lascia che l'Anti-Clamp e il tempo lavorino per te.

Salta i prossimi tre passaggi.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.