Réparez vos affaires Communauté Boutique

iPhone 12 Pro Max 배터리 교체

Retourner au tutoriel
Anglais
Coréen
Étape précédente Étape suivante

Traduction de l’étape 4

Étape 4
iPhone 12 Pro Max Battery Replacement: étape 0, image 1 de 3 iPhone 12 Pro Max Battery Replacement: étape 0, image 2 de 3 iPhone 12 Pro Max Battery Replacement: étape 0, image 3 de 3

  • Grab the first pull-tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.

  • Don't press down on the battery. Hold the iPhone firmly by its sides.

  • Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.

  • Pull at a low angle so the strip doesn't snag on the edge of the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.

  • If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.

첫 번째 당김-탭을 손가락으로 잡고 배터리에서 멀리, iPhone 하단을 향해 천천히 당기세요.

스트립을 팽팽하게 유지하기 위해 충분히 세게 당기지만 무리하게 당기지는 마세요. 스트립이 배터리 밑에서 늘어나서 떨어지도록 충분한 시간을 주세요.

배터리는 누르지 마세요. iPhone 양 옆을 단단히 잡으세요.

스트립을 평평하고 주름없이 유지하세요. 중앙 또는 한쪽을 당기지 말고 스트립 전체를 고르게 잡아 당기세요.

스트립이 배터리 하단 가장자리에 걸리지 않도록 낮은 각도로 당기세요.

접착 스트립이 끊어지면 손가락이나 뭉툭한 핀셋을 사용하여 회수하고 계속 당기세요—그러나 배터리 아래는 비집지 마세요.

스트립이 배터리 아랫면에서 끊어져 회수할 수 없는 경우 다음 스트립으로 넘어가고 아래의 추가 단계로 진행하세요.

[* black] Grab the first pull-tab with your fingers and ''slowly'' pull it away from the battery, toward the bottom of the iPhone.
[* black] Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.
[* black] Don't press down on the battery. Hold the iPhone firmly by its sides.
[* black] Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.
[* black] Pull at a low angle so the strip doesn't snag on the edge of the battery.
-[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but ***do not*** pry under the battery.
+[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or [product|IF145-020-4|blunt tweezers], and continue pulling—but ***do not*** pry under the battery.
[* black] If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.