Traduire l'étape #1 - Apple TV 1st Generation Lower Case Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais

Français

Traduction de l’étape 1

Étape 1

Flip the Apple TV over so that the bottom of the unit is facing up.
You need to remove the rubber base to get access to the screws.
Starting at one side of the device, use a hairdryer or a heat gun to soften the adhesive holding the rubber base in place.
The rubber base will be hot after heating, take extreme caution while proceeding to avoid personal injury.
While the adhesive is still warm, peel the bottom of the rubber base upwards to detach it from the metal plate.
Repeat the procedure described above until the rubber base has been completely removed.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.