Aller au contenu principal

Sostituzione ventola PlayStation 5

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 5

Étape 5
PlayStation 5 Fan Replacement, Remove the fan shroud screws: étape 0, image 1 de 1
Remove the fan shroud screws
  • Use a TR8 Torx security driver to remove the four screws securing the fan shroud to the case:

  • Two 23.3 mm-long screws

  • One 11.4 mm-long screw

  • One 31 mm-long screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

Usa un cacciavite Torx Security TR8 per svitare le quattro viti che fissano il supporto della ventola alla copertura:

Due viti da 23,3 mm

Una vite da 11,4 mm

Una vita da 31 mm

Durante questa riparazione, tieni traccia di ogni vite e assicurati di riavvitarle esattamente nel loro foro di origine per evitare di danneggiare la console.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.