Aller au contenu principal

Sostituzione gruppo struttura centrale Xbox Series X

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 17 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 6

Étape 6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: étape 0, image 1 de 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: étape 0, image 2 de 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: étape 0, image 3 de 3
Remove the center chassis assembly
  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

La struttura centrale è allineata al guscio con dei perni guida. Questi perni dovranno sfilarsi dai loro alloggi per permettere alla struttura di venire sollevata.

Prendi la struttura centrale e tirala verso la parte superiore del guscio, separando i perni guida dal guscio.

Solleva l'insieme del telaio centrale per rimuoverlo dal guscio.

Durante il rimontaggio, assicurati che nessuno dei cavi a nastro si schiacci mentre abbassi la struttura centrale nel guscio.

[title] Remove the center chassis assembly
[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
[* black] Lift out the center chassis assembly to remove it from the shell.
- [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.