Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 5 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.
-
Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.
-
Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.
-
Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.