Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
For the following steps, use a Phillips #1 screwdriver.
-
Remove the twelve 6-mm screws that border the bottom of the laptop.
-
Remove the 6-mm screw located in the lower middle of the device.
-
Remove the three 3-mm screws located in the battery bay.
-
Remove the one 4-mm screw located near the RAM.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.