Samsung Galaxy A20e Battery Replacement

Anglais

Japonais

Conditions préalables au tutoriel

Tous les tutoriels prérequis doivent être traduits avant que cette traduction soit considérée comme complète.

Samsung Galaxy A20e Back Cover Replacement

Samsung Galaxy A20e Fingerprint Sensor Replacement

Informations sur le tutoriel

= Terminé = Incomplet

Quelle pièce devez-vous remplacer ?

Titre

Introduction

Conclusion

If possible, turn on your device and test your repair before installing new adhesive and resealing.[br]
[br]
Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.[br]
[br]
To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).[br]
[br]
For optimal performance, '''calibrate your newly installed battery''': Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.[br]
[br]
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].[br]
[br]
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20galaxy%20a20e|Answers community] for help.