Sontek IQ Flow Sensor Deployment

Anglais

Français

Traduction de l’étape 7

Étape 7

Finishing

Ensure the conduit connected the node box and sensor has no kinks and is secure.
Wrap the conduit multiple times around the strut channel pole to prevent slack lying in the water.
Remove settled dirt from the sensor as it will impact measurements.
Attach a lock to the node box.
If using the 2 strut channel set-up as referenced earlier, secure the conduit to the short strut channel to which the sensor is connected, snake it through the riverbed (secured with rocks) to the tall strut channel, and wrap the remainder of the conduit around the tall strut channel.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.