Mackie CR3 CR4 L/R Luidsprekerkeuze bypass

Anglais

Néerlandais

Informations sur le tutoriel

= Terminé = Incomplet

Quelle pièce devez-vous remplacer ?

Titre

Introduction

These speakers provide really good sound for their price, and it seems they accomplished that by using some cheap components.

It is a known issue that the Powered Speaker Select switch often goes bad, resulting in no audio out of one or both speakers. You should try using some contact cleaner first, but that can end up being just a temporary solution.

This fix makes your selection of Left or Right powered speaker permanent, but apart from the Aux in on the front, it is easy to just plug in your audio cables ‘backwards’ to have the audio come out of the correct speakers if you want to change your setup later.

If you are halfway competent with a soldering iron, this is a quick and easy fix. You’ll need to supply your own wire for this.

This is my first guide, and I didn’t plan on making it when I did the fix, so sorry about the lack of photos and details. Nothing would make me happier than for someone to take this info, fix their own speakers, and put together a better version of this guide while doing so.

Conclusion

Quelle pièce devez-vous remplacer ?

Titre

Introduction

Conclusion

Étapes du tutoriel

Étape 1

Schakel uw actieve luidspreker uit, haal de stekker uit het stopcontact en verwijder de 8 korte kruiskopschroeven aan de achterkant.

Étape 2 — Onderzoek de printplaat

Zorg er voordat je gemakkelijk toegang hebt tot de onderkant van de printplaat en het achterpaneel aan de rechterkant.

Étape 3 — Solderen

Soldeer twee korte draden om de verbindingen te overbruggen om uw actieve luidspreker naar wens rechts of links te bedraden. Het eindresultaat zou eruit moeten zien als op de foto, (hier op ziet u de rechtse luidspreker).

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.