Réparez vos affaires Communauté Boutique

Lenovo ThinkPad X390 Yoga Austausch der hinteren Abdeckung

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Allemand
Étape suivante

Traduction de l’étape 1

Étape 1
Lenovo ThinkPad X390 Yoga Back Case Replacement: étape 0, image 1 de 1

  • Safety Procedures:

  • Shutdown and Disable Power Supply: 1. Disconnect adapter. 2. Press F1 key to enter BIOS setup powering up Laptop. 3. Go to Configuration menu. 4. Select Power and press Enter. 5. Highlight Disable Built-in Battery and press Enter. 6. Confirm by selecting "Yes" and pressing Enter. 7. System will power down, and disabled battery.

  • Electrostatic Discharge (ESD) Safety: 1. Ground yourself to prevent static damage by wearing an ESD wrist strap or touching a grounded metal surface.

  • Remove the SIM Card Tray 1. Insert a straightened paperclip into the hole on the SIM card tray. 2. Gently push to eject and remove the tray.

  • Use a Phillips #1 screwdriver to unscrew the captive screws from the back of the device. The screws should not be removed from the back panel, so don't try to force them out.

  • Disassemble the Laptop: Remove the Bottom Cover and Battery: 1. Loosen five captive screws on bottom of laptop. 2. Use a non-metallic pry tool to carefully loosen clips along the rear cover. 3. Lift and remove bottom cover. 4. Disconnect internal battery cable from system board. 5. Remove five screws securing the battery and lift it out of system.

Benutze einen #1 Kreuzschlitzschraubendreher, um die acht selbsthaltenden Schrauben von der Rückseite des Gerätes zu lösen.

Die Schrauben sollten sich von der rückwärtigen Abdeckung nicht entfernen lassen, also wende auch keine Kraft auf, um sie zu entfernen.

-[* black] Use a Phillips #1 screwdriver to unscrew the eight captive screws from the back of the device.
- [* icon_note] The screws should not be removed from the back panel, so don't try to force them out.
+[* black] Safety Procedures:
+ [* black] Shutdown and Disable Power Supply: 1. Disconnect adapter. 2. Press F1 key to enter BIOS setup powering up Laptop. 3. Go to Configuration menu. 4. Select Power and press Enter. 5. Highlight Disable Built-in Battery and press Enter. 6. Confirm by selecting "Yes" and pressing Enter. 7. System will power down, and disabled battery.
+ [* black] Electrostatic Discharge (ESD) Safety: 1. Ground yourself to prevent static damage by wearing an ESD wrist strap or touching a grounded metal surface.
+ [* black] Remove the SIM Card Tray 1. Insert a straightened paperclip into the hole on the SIM card tray. 2. Gently push to eject and remove the tray.
+ [* black] Use a Phillips #1 screwdriver to unscrew the captive screws from the back of the device. The screws should not be removed from the back panel, so don't try to force them out.
+ [* black] Disassemble the Laptop: Remove the Bottom Cover and Battery: 1. Loosen five captive screws on bottom of laptop. 2. Use a non-metallic pry tool to carefully loosen clips along the rear cover. 3. Lift and remove bottom cover. 4. Disconnect internal battery cable from system board. 5. Remove five screws securing the battery and lift it out of system.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.