MacBook Pro 13" Touch Bar 2018 Logic board Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais

Néerlandais

Traduction de l’étape 2

Étape 2

Remove the pentalobe screws

Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
Use a P5 Pentalobe driver to remove the six screws securing the lower case:
Two 6.2 mm screws
Four 3.4 mm screws
Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.