Aller au contenu principal

여는 절차

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 73 tutoriels qui comprennent cette étape.

Anglais
Coréen

Traduction de l’étape 3

Étape 3
Opening Procedure, Anti-Clamp instructions: étape 0, image 1 de 3 Opening Procedure, Anti-Clamp instructions: étape 0, image 2 de 3 Opening Procedure, Anti-Clamp instructions: étape 0, image 3 de 3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the left edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

다음 세 단계는 여는 절차를 더 쉽게 하기 위해 고안된 도구 안티-클램프에 대한 설명입니다. 안티-클램프를 사용하지 않는다면 세 단계를 건너뛰고 다른 방법을 사용하세요.

안티-클램프 사용법에 대한 전체 지침은 이 안내서를 확인하세요.

파란색 손잡이를 뒤로 당겨 안티-클램프의 팔을 잠금 해제하세요.

iPad 아래에 물건을 놓음으로써 iPad가 흡입 컵 사이에 수평이 되도록 하세요.

흡입 컵을 왼쪽 가장자리 중앙 근처에 위치하세요—하나는 위쪽에, 하나는 아래쪽에.

안티-클램프의 하단을 안정적으로 잡고 상단 컵을 꾹 눌러서 흡착하세요.

iPad의 표면이 너무 미끄러워 고정 방지 클램프가 잘 붙지 않는다면 테이프를 사용하여 더 그립감 있는 표면을 만들 수 있습니다.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.